AVG Autotech Controls
Autotech Controls HomeAbout Autotech ControlsSupportDownloadsFree CatalogsContact Autotech Controls

M1750

1. M1750 PLS for Back Panel Mounting:
    PLS Chassis: (See step 2)
    Source Module: (See step 3)
    Logic Modules: (See step 4)
    Top Plate: (See step 5)
    Output Relays: (See step 6)
    NEMA 12 (IP52) Enclosure: (See step 7)

2. PLS Chassis
Select PLS chassis for desired number of channels and type of outputs:
(a) Electromechanical and solid-state outputs cannot be mixed on same chassis.
(b) Solid-state AC, DC or AC/DC outputs can be mixed on same chassis
(c) Maximum of 6 x 8 channel or 4 x 12 channel chassis can be wired in parallel to the same transducer
ASY-M1750-011 8-channel PLS chassis for electromechanical-relay outputs
ASY-M1750-1200 12-channel PLS chassis for electromechanical-relay outputs
ASY-M1750-0SS 8-channel PLS chassis for Solid-state relay outputs
ASY-M1750-12SS 12-channel PLS chassis for Solid-state relay outputs
3. Source Module
Select appropriate source module:
  (a) With resolver as position transducer, must use decoder source module in the master chassis.
  (b) Slave chassis must use display source module (ASY-M1750-DISP).
ASY-M1750-359D Resolver decoder source module, ratiometric, 360 counts, offset and display
ASY-M1750-999D Resolver decoder source module, ratiometric, 1000 counts, offset and display
ASY-M1750-DISP Display source module, no offset
4. Logic Modules
Select type and number of logic modules
ASY-M1700-L11 Dual-preset, Angle ON/Angle OFF module
ASY-M1700-LTD1 Single-preset, Angle ON/Digital-time OFF module (1 ms-100 ms/count)
5. Top Plate
Select top plate corresponding to the source module and number of channels:
MTP-M1750-8DEC Top plate for decoder source module and 8 channel PLS
MTP-M1750-12DEC Above top plate for decoder source module and 12 channel PLS
MTP-M1750-8DIS Top plate for display source module and 8 channel PLS
MTP-M1750-12DIS Above top plate for display source module and 12 channel PLS
6. Output Relays
Select type and number of output relays:
KDD-012DC-10SIG 10 A, 125 VDC/250 VAC, DPDT electromechanical-relay
KSS-120AC-ERI 3 A, 120 VAC, Solid-state AC relay
KSS-055DC-ERI 2 A, 3-40 VDC, Solid-state DC relay
KSS-AC/DC-ERI Low-leakage (<0.l mA), AC/DC solid-state relay, 135VAC (rms) @ 0.35 A. or 190 VDC (max.) @ 0.5 A
7. NEMA 12 (IP52) Enclosure:
Select appropriate NEMA 12 (IP52) enclosure, if required:
ENC-M1700-NEMA NEMA 12 (IP52) enclosure without see-thru window for 8 channel PLS
ENC-M1700-W11 Above enclosure with see-thru window including NEMA 1 plate
ENC-M1700-N12 NEMA 12 (IP52) enclosure without see-thru window for 12 channel PLS
ENC-M1700-W12 Above enclosure with see-thru window including NEMA 1 plate
8. Position Transducers
Select appropriate transducer from AVG Automation part RL100, E7R, E8R or RL101. Please see “How to order” information on position transducers and appropriate accessories, such as interconnect cables, mounting brackets, couplings, etc.
9. Accessories
Select optional accessories, when required:
SAC-RD360-010 Remote angle readout, 0-359
SAC-RD999-010 Remote readout/tachometer, 0-999

 

Home | About Us | Support | Downloads | Free Catalogs | Contact

Copyright © 2014 Autotech Controls. All rights reserved. All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. Autotech Controls disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice.