AVG Autotech Controls
Autotech Controls HomeAbout Autotech ControlsSupportDownloadsFree CatalogsContact Autotech Controls

Specifications

SAC-QDNET-010 TSX Qaunntum DeviceNet Scanner Module 

DeviceNet Parameters:

  • Strobe, poll, COS (Change-of-State), or Cyclic I/O data for each node
  • Interscan delay
  • Scan list
  • Background poll rate


PLC Processor-to-Scanner Communication:
    DIP Switch Selectable
    8 I/O: uses 8 Input and 8 Output registers
    32 I/O: uses 32 Input and 32 Output registers

    DeviceNet Data
    8 I/O Configuration: up to 28 words of input
        and output from the network.
    32 I/O Configuration: up to 124 words of
        input and output from the network.

Power Consumption:
    DeviceNet Current Load:
        90 mA (max.)
    Backplane Current Load;
        400 mA @ 5 VDC (max.)

DeviceNet Power:
    24 VDC, Nominal

Communication Rates:
    125 kbps, 250 kbps, 500 kbps
    Messaging Capabilities:
    (Master) Poll, Strobe, COS, or Cyclic

Isolation:

    Optical isolation between Backplane and
    Network

Module Location:

    Any I/O slot in Quantum PLC rack, local,
    remote, or DIO

Network Address:

    00-63

ENVIRONMENTAL CONDITIONS:

    Operating Temperature
        32 to 140 °F (0 to 60 °C)
    Storage Temperature
        -40 to + 185 °F (-40 to +85 °C)
    Humidity
        5 to 95% noncondensing
    Shock (unpacked):
        Operating 30g
        Nonoperating 50g
        Vibration (unpacked)5g from 10 to 500 Hz

Home | About Us | Support | Downloads | Free Catalogs | Contact

Copyright © 2014 Autotech Controls. All rights reserved. All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. Autotech Controls disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice.