AVG Autotech Controls
Autotech Controls HomeAbout Autotech ControlsSupportDownloadsFree CatalogsContact Autotech Controls

Intuitive, Simple to Program without PC or Software, Show Position/RPM on 4 digit LED Display. Field Programmable All-in-One.

Incremental: 1 to 1024 counts per revolution

4096 Pulse Transitions with Quadrature 4x

Absolute: 1 to 4096 counts per revolution

Binary, BCD, Gray code Field Programmable Options Specifications

SSI, DeviceNet, Profibus or Ethernet

(Rockwell Ethernet IP, Modbus TCP/IP, Uticor IP, GE SRTP protocols)


Smart-Encoder Absolute models are available with high level networking capability such as SSI protocol DeviceNet Profibus or even Ethernet with multiole protocols such as Rockwell’s Ethernet IP, Modbus TCP/IP, Uticor IP and GE SRTP.

First Encoder with built-in Ethernet

FM and ATEX Certified Explosion Proof Smart Encoder - The Most Rugged Encoder on the Market!


Choice of Stainless Steel, Water Submersible or Explosion Proof

Size 40 Smart Encoders, both Incremental as well as Absolute,
are available in stainless steel, water submersible housing as
well as Fm approved explosion proof housing, where as the
water submersible model has a visible display and programming
buttons. The explosion proof unit needs to have its back and
housing unscrewed to allow field programming.



Specifications

Housing Size 40 (4.0" dia.) Size 40 Explosion Proof
Max. Starting Torque @ 25° C (oz. in.) 8 (576.1) 8 (576.1)
Moment of Inertia (oz* in2) 6.4 x 104 6.4 x 104
Max. Slew Speed (RPM) 5000 5000
Shaft Size 5/8” 5/8”
Max. Shaft Loading Axial and Radial: 120 lb. 120 lb.
Bearing Life at Max. Mfr. Spec. 2 x 109 2 x 109
Shock 150g for 11ms
Vibration 20g to 2000Hz
Enclosure NEMA 4/IP 66 NEMA 4x (Div1 , Class 1, Group B,C,D)
Operating Temperature -10°C to 70° C
Storage Temperature -40°C to 85°C

Resolver Incremental

ELECTRICAL

INPUT POWER
    Voltage: 18-30 VDC
    Current: 250 mA @ 24 VDC exclusive of load
    High Voltage: Min. 2.4 VDC TTL Compatible
    Low Voltage: Max. 0.4 VDC TTL Compatible

PROTECTION
    Reverse Voltage Protected Inputs
    Short Circuit Protected Outputs

POWER-ON SETTLING TIME
    Upon power-up the outputs are tri-stated
    for up to 100mSec.

OUTPUT FORMAT
    Incremental
    Programmable up to 1024 Pulses Per Rev.

OUTPUT DRIVERS
    Line driver device: ET7272
    Voltage: 30V/V = 18-30VDC (Vin = Vout)
    30V/5= 5VDC
    Max Output Current: 40mA
    High Voltage: 30 VDC@ 20mA source current
    Low Voltage: 5 VDC @ 20mA sink current

Resolver Absolute

ELECTRICAL

INPUT POWER
    Voltage: 18-30 VDC
    Current: 250 mA @ 24 VDC exclusive of load High Voltage:
    Min. 2.4 VDC TTL Compatible Low Voltage: Max. 0.4 VDC
    TTL Compatible

OUTPUT DRIVERS
    Line driver device: ET7272
    Voltage: 30V/V = 18-30VDC (Vin = Vout) 30V/5= 5VDC
    Max Output Current: 40mA
    High Voltage: 30 VDC@ 20mA source current Low Voltage:
    5 VDC @ 20mA sink current

OUTPUT FORMAT
    Gray Code/Gray Code Minus:
        Programmable up to 4096
    Binary/Binary Minus:
        Programmable up to 4096
    BCD: Programmable up to 1999

DATA SYNCHRONIZATION
    Data Transfer input:
    HIGH: Position data continuously updated
    LOW: Position data latched at High to low transition and
    remains unchanged until input goes High again

PROTECTION
    Reverse Voltage Protected Inputs Short Circuit
    Protected Outputs

POWER-ON SETTLING TIME
    Upon power-up the outputs are tri-stated for up to
    100mSec.

Size 40 Resolver Based (Face Mount) A40


Size 40 Resolver Based (Face Mount)

Made in America

Home | About Us | Support | Downloads | Free Catalogs | Contact

Copyright © 2014 Autotech Controls. All rights reserved. All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. Autotech Controls disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice.