Dual Multi-turn DigiSolver Part Numbers

NEMA 13, size 40 –4.0” (101.6 mm) dia. Dual (multi-turn) DigiSolver with military connector
1. Short-Circuit Protection
    N: NONE
    S: Short-circuit-proof outputs (For P-Type outputs only, Vmax 8-50 VDC)
2. Output Format
    B6, 12: Natural Binary, 18-bits over 64 turns, 12-bits per revolution. Total 64 turns
    G5, 10: Standard Gray Code, 15-bits over 32 turns, 10-bits per revolution. Total 32 turns
    D5, 10: BCD, 15-bits over 32 turns, 10-bits per revolution. Total 32 turns
3. Input Power Supply
    5: 5 VDC
    8: 8-30 VDC
4. Digital Output
    T: TTL with multiplexing (High Logic TRUE)
    P:  PNP Source Transistor (High Logic TRUE)
    N: NPN Sink Transistor (Low Logic TRUE)
    C: NPN Sink Transistor (High Logic TRUE)
5. Options (For other options, consult factory)
    0: NONE
    P: With PC-sync. Circuit
    V: Analog Velocity, 0-10VDC
    L: P and V options together

2. Accessories

MMB-EN359-010	Mounting Bracket for E5, E7, & E8 DigiSolvers
CPL-005/8-5/8	5/8” to 5/8” Flexible coupling (1.25” dia. X 1.5” length)
ECM-19REC-ITT	Mating MS Connector, 19 pin (for single-turn units)
SAC-P5VDC-010	Regulated DC Power Supply, 5VDC @ 3 Amp
SAC-P12DC-010	Regulated DC Power Supply, 12VDC @ 1 Amp
SAC-P24DC-010	Regulated DC Power Supply, 24VDC @ 1 Amp
2.1 Cables:
In Cable part numbers, xxx = length in feet. Replace xxx by one of the standard lengths: 010, 020, 050 and increments of 50 feet (e.g., 100, 150, 200 ft., etc.
CBL-29S22-Cxxx	Cable, 29 Conductors, 27 x 22 gauge and 2 x 12 gauge
CBL-29S22-Mxxx	Above cable with 30 pin MS connector at one end