M1150 and M1151 PAK•PLS Part Numbers

M1150 Series PAK PLS
SAC-M1150-08P		PAK•PLS with 8 PNP type outputs and terminal blocks on the rear for resolver and output connections
SAC-M1150-08N		PAK•PLS with 8 NPN type outputs and terminal blocks on the rear for resolver and output connections
SAC-M1150-16P		PAK•PLS with 16 PNP type outputs and terminal blocks on the rear for resolver and output connections
SAC-M1150-16N		PAK•PLS with 16 NPN type outputs and terminal blocks on the rear for resolver and output connections
SAC*-M1151-X₁ X₂ X₃
X₁ = Number of Output Channels
8:		8 Channels
6:		16 Channels
X₂ = Type of Output
P:		PNP (Sourcing) Transistor
N:		NPN (Sinking) Transistor
X₃ - Special Options
Z:		ModZ
S:		Shift Register
B:		Brake Wear Monitor
0:		None
* For Slave MiniPLS Change the A in SAC- to S
* For 220/240 VAC, 50/60 Hz AC power input, change the C in SAC- to 2
SAC-M1151-8X₁0P	PAK•PLS with 8 Outputs and Programmable Analog Tach/Position Outputs, DC Power Input, and Brake Monitor and four program setups.
X1 = Output Type
P:	PNP Source Transistor Output
N:	NPN Sinking Transistor Output
Position transducers
The M1151 requires a single-turn resolver as an input device, such as AVG Automation's RL100, RL101, E7R, or E8R. Please see “How to order” information on position transducers and appropriate accessories, such as interconnect cables, mounting brackets, couplings, etc.
Remote Power Relay Output Chassis
Select type and number of output chassis:
ASY-RLYCH-08RL	Chassis for 8 EM-relay outputs with motion detector output and built-in power supply (Use only KSD-012DC-10A SPDT relay)
ASY-RLYCH-16RL	Above with 16 EM-relay output (Use only KSD-012DC-10A SPDT relay
ASY-RLYCH-08SS	Chassis for 8 solid-state relay outputs or electromechanical SPDT outputs (using KSD-A12DC-10AMP relays)
ASY-RLYCH-16SS	Above chassis for 16 solid-state relay outputs (using KSD-A12DC-10AMP relays)
NEMA 4 Cover & Mounting Brackets
MBZ-M1150-NEMA4		NEMA 4 cover for M1151 Series PLS
MBK-M1150-011		Back Panel mounting brackets for M1151 series PLS (includes 2 brackets)
MBK-M1150-013		Replacement front panel mounting brackets for M1151 series PLS (includes 2 brackets)
Remote Power Relay Output Chassis
Select type and number of output chassis:
ASY-RLYCH-08SS		Chassis for 8 solid-state relay outputs or electromechanical SPDT outputs (using KSD-A12DC-10AMP relays)
ASY-RLYCH-16SS		Above chassis for 16 solid-state relay outputs (using KSD-A12DC-10AMP relays)
ASY-RLYCH-08RL		Chassis for 8 EM-relay outputs with motion detector output and built-in power supply (Use only KSD-012DC-10A SPDT relay)
ASY-RLYCH-16RL		Above with 16 EM-relay output (Use only KSD-012DC-10A SPDT relay)
220/240 VAC Units
Relays
KSD-A12DC-10A		Electromechanical relay, SPST, Form A, 120 VAC @ 10 A, resistive
KSS-120AC-3AMP		AC solid-state relay, 120 VAC @ 3 A
KSS-60VDC-3AMP		DC solid-state relay, 9-60 VDC @ 3 A
KSS-200DC-1AMP		DC solid-state relay, 0-200 VDC @ 1 A
KSD-012DC-10A		Electromechanical relay, SPDT, 120 VAC @ 10 A Form C (Note: for use with ASY-RLYCH-08RL and ASY-RLYCH-16RL chassis only)
Cables
CBL-RLYCH-D04		15-conductor cable, with overall foil shield, 4 ft. length, sub D connector on one end and open on the other for interconnection of relay chassis to PLS
CBL-15S22-DAxxx		Above with extend length. xxx = length in ft., 010, 025, 050, and 50 ft. increments, e.g., 100, 150, 200 ft., etc.
CBL-RLYCH-DA4		15-conductor cable, with overall foil shield, 4 ft (1219.2 mm) length and sub D connector on both ends for interconnection of relay chassis to the PLS
CBL-RLYCH-DAxxx		Above with extend length. xxx = length in ft, 010, 020, 050, and 50 ft increments, e.g., 100, 150, 200 ft, etc.