Size 25 & 40 Smart-Encoder™ Part Numbers

Part number grid

(Note: Optical Incremental available in Size 25 only)

1. Choice of Size:
25 for size 25 or 2.5 dia
40 for size 40 or 4.0 dia

2. Choice of Incremental/Absolute/Optical/Resolver:
    PI for Optical Incremental
    RI for Resolver Incremental
    RA for Resolver Absolute

3. Mounting:
    F for Flange Mount (A25)
    S for Servo Mount (A25)
    A for A40 Models

4. Input power/Output driver (ET7272):
    30V/V - Output follows power voltage (all models)
    30V/5 - Output voltage 5V, TTL compatible (all models)
    30V/N - Sinking (absolute models only)

5. Output connector location:
E for End mount
S for Side mount

6. Output MS connector/Network connector:
    05SL - 5pin Single line Incremental
    07SL - 7pin Single line Incremental
    07DL - 7pin Differential Incremental
    08SL - 8pin Single line Incremental
    08DL - 8pin Differential Incremental
    10DL - 10pin Differential M18 Incremental
    10DM - 10pin Differential M12 Incremental
    17SL - 17pin Single line Absolute
    19SL - 19pin Single line Absolute
    NWDN - DeviceNet connector Absolute
    NWPB - Profibus connector Absolute
    SSIC - SSI connector Absolute
    NWET - Ethernet connector Absolute

7. Special Construction
    SS - Stainless steel, Water submersible, size 25 or size 40
    EX - Explosion Proof, size 40
    AL - Standard Aluminum case, size 25 or size 40

8. Gear Trains (Applicable only for size 40 encoders):
    002 - 2:1 003 - 3:1 004 - 4:1
    005 - 5:1 008 - 8:1 010 - 10:1
    012 - 12:1 016 - 16:1 020 - 20:1
    024 - 24:1 032 - 32:1 038 - 38:1
    040 - 40:1 048 - 48:1 060 - 60:1
    064 - 64:1 080 - 80:1 100 - 100:1

Electrical Specifications:
    Input power voltage: Optical models 10VDC - 30VDC
        Resolver models 18VDC - 32VDC
    Input power current: Optical 100mA exclusive of load
        Resolver 250mA exclusive of load
    Reverse voltage protection: YES
    Encoder Output Signals:
        Max. voltage 30VDC, max. current/output: 40mA
        Line driver device: ET7272
        “N” model: Sinking side of ET7272, no pull-up needed
        High voltage: Vcc -0.5V @20mA source current
        Low voltage: 0.5V @ 20mA sink current
    Encoder Input Signals:
        High voltage: Min. 2.4VDC TTL compatible
        Low voltage: Max. 0.4VDC TTL compatible

Temperature Specifications:
Operating: -10°C - 70°C
Storage: -40°C - 85°C

Product Number Example: A25 – PI – F – 30V/5 – S – 10DL – AL
2.5” Diameter Encoder, Optical, Incremental Type output, 5V Output Voltage, 10 pin Differential Side Connector, Aluminum Housing.

Cable

CBD-10S22-Mxxx	Communication Cable with a 10-pin connector attached (10DL and 10DM)
CBL-05SL-Mxxx	Communication Cable with a 5-pin connector attached (Single-line)
CBL-07SL-Mxxx	Communication Cable with a 7-pin connector attached (Single-line)
CBL-07DL-Mxxx	Communication Cable with a 7-pin connector attached (Differential)
CBL-08SL-Mxxx	Communication Cable with an 8-pin connector attached (Single-line)
CBL-08DL-Mxxx	Communication Cable with an 8-pin connector attached (Differential)
ECM-05PIN-12MM	Communication Cable - 5-pin, size M12, mating connector, (female, cable end)
ECM-07PIN-M16M	Communication Cable - 7-pin, size M16, mating connector, (female, cable end)
ECM-08PIN-12MM	Communication Cable - 8-pin, size M12, mating connector, (female, cable end)
ECM-10PIN-M18	Communication Cable - 10-pin, size M18, mating connector, (female, cable end)
ECM-10REC-ITT	Communication Cable - 10-pin, size M12, mating connector, (female, cable end)