M1151-M10A
| M1151-M10 Programmable Resolver to Digital Multi-Turn
Decoder
|
||
| SAC*-M1151-M10 Ax10
|
Basic unit resolver to digital decoder |
|
|
|
||
| T:
|
TTL, 5 V logic with multiplexing
|
|
| P:
|
PNP (sourcing) transistor, 100 mA max. @ 50 V max., high Logic TRUE | |
| N:
|
NPN (sinking) transistor, 100 mA max. @ 50 V max., low Logic TRUE | |
| *Standard unit is offered for 120 VAC, 60 Hz power input.
For 220V AC, 50 Hz power replace C in "SAC" with 2 For 240V AC, 50 Hz power replace C in "SAC" with 4 |
||
| Position Transducer | ||
| M1150-M10 requires AVG Automation's single-turn resolvers such as RL210 etc. series of resolvers as a position transducer. Consult section on Position Transducer in Autotech's master catalog for ordering information on transducers, cables, couplings, mounting brackets, etc. | ||
| NEMA 4 cover & back panel mounting
bracket
|
||
| Cable
|
||
| CBL-37S22-DCxxx
|
27 conductor cable for digital output wiring with overall foil shild and 37 pin sub "D" shield and 37 pin sub "D" connector on one end. xxx=Standard Length in feet (10, 25, 50 and in increments of 50 feet) | |
| ECM-37PIN-M11 | 37 pin sub "D" male connector (mates with the connector on M1151-M10A) | |